Sludge thermochemical treatment
An introduction to sludge thermochemical treatment methods
Your web browser is out of date.
Update your browser for better security, speed and to get the best experience on this website.
Gasification is an extension of the pyrolysis process for thermochemical treatment of sludge, with the conversion taking place in a partial reducing atmosphere at higher temperatures than those used for pyrolysis. The process aims to completely convert the carbonaceous content to a solid ash and a clean combustible gas product (called syngas) for use locally.
An introduction to sludge thermochemical treatment methods
Thermochemical methods are used for either degrading the sludge solids or pre-treating sludge upstream of anaerobic digestion
Various reactor configurations exist for sludge thermochemical treatment which vary in design, operation and application
An introduction to non-oxidative sludge thermochemical treatment methods
Gasification is an extension of the pyrolysis process for thermochemical treatment of sludge
Animation demonstrating the workings of Valmet's gasification technology. Using biomass to generate electricity and heat in existing coal boilers.
Pyrolysis is the decomposition of organics at temperatures of 300-1300 °C in the absence of oxygen at atmospheric pressure
Hydrothermal processes employ elevated temperatures and pressures in wet conditions and in the absence of oxygen
Hydrothermal carbonisation converts sludge predominantly into a hydrochar solid product at temperatures of 180-300 °C
Hydrothermal liquefaction of sewage sludge takes place at temperatures of 250–400 °C and pressures above 40 bar
Hydrothermal gasification converts sludge to a hydrogen and/or methane-rich gas stream at temperatures up to ~550 °C
Oxidative methods for sludge thermal treatment comprise incineration, wet air oxidation and supercritical water oxidation
Non-oxidative thermochemical treatment of sewage sludge refers to treatment at elevated temperatures in the absence of oxygen
Thickening, dewatering and drying extract water from sludge to reduce the sludge volume
Sludge stabilisation − alkaline stabilisation, lime and solids dosing, plus anaerobic and aerobic digestion
Sludge is the main waste stream from the treatment of wastewater